Operation; Operation In Combination With An External Timer Or Coinbox - HAPRO PROLINE Anleitung

Operation

The tanning appliance is set up for standard use with an external timer or a coinbox. If the appliance must function without the external timer or coinbox, i.e. with an internal timer, the required tanning
time will have to be adjusted according to the following procedure.
General:
+
Note
Should the set up need to be interrupted, this can be done by pressing the "stop" button.
If no adjustment is entered within 30 seconds, the operation will return to its original settings.
When using an external timer or a coinbox, the tanning time indicator must be set at 0.

Operation in combination with an external timer or coinbox:

Note
The tanning time ascends numerically.
Hold the buttons for "body cooling off" and "body cooling on" down
together for 10 seconds .
After 10 seconds, the display will show "0" (tanning time) .
By pressing the button "body cooling on" you can increase the
tanning time (maximum 30 minutes) .
By pressing the button "body cooling off" you can decrease the
tanning time .
Pressing the "start" button confirms the adjustment .
When confirming, there will be a short electronic bleep tone .
If the use of an external timer is chosen, the indication "-A" will be
displayed .
The use of an internal timer will be indicated by the display of "-H" .
If there is an external timer or coinbox, the machine starts up automatically .
By pressing the "stop" button once, the appliance's operation will be paused . If the"stop" button is pressed several
times, the machine will remain set at pause . The machine will only stop when the tanning time has expired .
If the appliance is set at pause, it can be restarted by pressing the "start" button .
5