Scope Of Delivery; Safety Instructions; Symbols On The Device; Safety Devices - Kärcher HD 9/100-4 Cage Advanced Bedienungsanleitung

Scope of delivery

Check the contents for completeness when unpacking.
If any accessories are missing or in the event of any
shipping damage, please notify your dealer.

Safety instructions

 It is essential that you read the safety instructions
5.963-314.0 before initial startup.
 Observe the national regulations for liquid jet clean-
ers.
 Observe the national accident prevention regula-
tions. Liquid jet cleaners must be tested regularly.
The test result must be recorded in writing.
 Do not modify the device or accessories.

Symbols on the device

The device may not be connected to the pub-
lic drinking water network.
The high-pressure jet must not be directed at
persons, animals, live electrical equipment or
at the device itself. Protect the device from
frost.
Always wear hearing protection and safety
goggles when working with the device.
Hot surface. Do not touch.
Dangerous electrical voltage. Access only for
qualified electricians.

Safety devices

CAUTION
Missing or modified safety devices
Safety devices are provided for your own protection.
Never modify or bypass safety devices.
The safety devices are set and sealed by the manufac-
turer. Adjustments are performed only by customer ser-
vice.
Overpressure protection
The device is protected against exceeding the maxi-
mum operating pressure either by a safety valve or a
bursting disc.
Safety valve
The safety valve opens when the permissible operating
pressure is exceeded and the water flows into the open.
Bursting disc
If the permissible operating overpressure is exceeded,
the bursting disc will be destroyed and the water flows
into the atmosphere without pressure.
Power switch
The power switch prevents the device from starting up
unintentionally. Turn the power switch to 0/OFF during
work breaks or when finishing work.
Safety latch
The safety latch on the high-pressure gun prevents the
high pressure water jet from being triggered uninten-
tionally.
Overflow valve with pressure relief
Only the Advanced version has this function.
When the high-pressure gun is closed, the overflow
valve opens and the entire water volume flows back to
the suction side of the high-pressure pump. The pres-
sure in the high-pressure hose drops. This reduces the
actuating force of the high-pressure gun and extends
the service life of the device.
Water shortage safeguard
The water shortage safeguard switches off the motor if
the water supply is inadequate.
The water shortage safeguard indicator light lights up.
Only the Advanced version has this function.
The thermostat valve protects the high-pressure pump
from overheating in circulation mode when the high-
pressure gun is closes. The thermostat valve opens
when the water temperature exceeds 80 °C and chan-
nels the hot water into the open.
Motor circuit breaker
The motor circuit breaker interrupts the motor circuit
when the current consumption of the motor is too high.

Device description

Overview of the unit
Illustration A
Figure B
Push handle
1
Hose/cable holder
2
Filter venting screw
3
Operating hours counter
4
Advance pressure pump venting screw (option)
5
Accessory compartment
6
Pressure gauge
7
Safety valve/bursting disc
8
High-pressure connection
9
Water shortage safeguard
10
Type plate
11
Parking brake pedal
12
Filter
13
Water connection
14
Mains connection cable with mains plug
15
Power switch
16
Water shortage indicator lamp
17
Operating state indicator lamp
18
Oil drain plug
19
Oil level gauge
20
Oil filler neck with oil dipstick
21
Venting lever
22
Advance pressure pump (option)
23
Spray lance storage
24
Lashing eyelet
25
Attachment point for catching fixture
English
Thermostat valve
17