Manual Electrode Welding - Fronius TransPocket 2000 Bedienungsanleitung

Manual electrode welding

Manual electrode 1.
welding
2.
3.
4.
5.
6.
7.
Important! If the TP 2000 R.C. welding machine is used with a remote-control unit, then
it is only possible to adjust the welding current on this r.c. unit. The maximum welding
current that can be selected is indicated by the welding dial on the machine (3) .
Plug the welding cable into current socket (A) or (B) , depending on the type of
electrode, and turn it clockwise to latch it
Plug the machine into the mains
Shift the mains switch (1) into the "I" position
Warning! An electric shock can be fatal. As soon as you shift the mains switch
(1) into the "I" position, the rod electrode becomes live. Make sure that when
this happens, the rod electrode does not touch any electrically conducting or
earthed parts such as e.g. the workpiece, machine housing etc.
Operational readiness indicator (2) is lit up
Select the arc force on the arc-force dial (5)
Select the desired amperage on the welding current dial (3)
Start welding
5