General Description; Scope Of Delivery; Overview; Technical Data - Parkside PHS 160 E5 Originalbetriebsanleitung

GB MT

General Description

The illustration of the principal
functioning parts can be found
on the foldout page.

Scope of delivery

Carefully unpack the trimmer and check
that it is complete. Dispose of the packag-
ing material correctly.
• Device
• Dust box
• External dust extraction adaptor
• 3 sanding sheets (two-part)
(grain size P 80 / P 120 / P 180)
• Sanding inger
• 3 sanding sheets for sanding inger
(grain size P 80 / P 120 / P 180)
• Instruction manual

Overview

1 On/off switch
2 Hand rest
3 Vent
4 Release button dust collection box
5 Mains cable
6 Dust collection box lid
7 Tab for opening the
dust collection box
8 Dust collection box
9 Connection for dust extraction
10 Sanding plate
11 External dust extraction adaptor
12 3 sanding sheets (two-part)
13 Sanding inger
14 3 sanding sheets for sanding
inger
15 Extraction holes for sandig plate
16 Clamping lever for unlocking
sanding plate
50
17 Mounting frame for ilter insert
18 Filter insert for dust collection box

Technical Data

Detail sander .......................... PHS 160 E5
Rated input voltage (U) .....
Power input (P) ............................ 160 W
Idling speed (n ) ....................13000 min
0
Oscillation rate (n) .................26000 min
Weight (without accessories) ... appr.
Protection class .................................
Protection category........................... IPX0
Sound pressure level
(L ) ...................... 76 dB(A);
pA
Sound power level
) .................... 87 dB(A); K
(L
WA
Vibration (a ) ........... 9 m/s
h
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).
230 V~, 50 Hz
-1
-1
1.1 kg
II
K = 3 dB
pA
= 3 dB
WA
; K= 1.5 m/s
2 2