Chicco Easy Touch Plus Gebrauchsanleitung Seite 21

Error Message
vi-
tal
for
nd
nic
en-
blic
the
ual.
If the LCD displays the following icons at intervals:
with
the
ary
this means that the appliance is in Calibration mode. The readings are not accurate when the ap-
pliance is in this mode. Switch off the appliance and switch it back on again to ensure it functions
properly.
tch
REF 00000657000000
our
0197
Radiant Innovation Inc.
ce
Indirizzo: 1F, n.3, Industrial East 9th Rd., Science-Based Industrial Park, HsinChu, Taiwan
with
MT Promedt Consulting GmbH
Indirizzo: Altenhofstrasse 80, D-66386 St. Ingbert, Germany
with
Distributed by:
Artsana S.p.A.
Via Saldarini Catelli 1, 22070 Grandate (Co), Italy
Problem
The temperature reading is over
42.2 °C (108.0°F).
The temperature reading is under
34°C (93.2°F) in forehead mode.
The appliance will not switch on.
Solution
Make sure the patient remains in the same room for about
5 minutes and has not undergone physical exertion or had a
bath in the last 30 minutes; then check that the probe is clean
before taking the temperature again.
If it still malfunctions, please contact your local retailer.
Replace the battery with a new one.
If it still malfunctions, please contact your local retailer.