Maintenance / Cleaning - Delabie SECURITHERM Montage Und Inbetriebnahme

MAINTENANCE
• Check the calibration at least twice a year (Fig. A).
• We recommend checking the anti-scalding failsafe every two months in hard water areas
or if the water is heavily charged. Shut-off the cold water and ensure that the hot water shuts off
in less than 2 seconds.
• To maximise the reliability of thermostatic mixing valves over time, and to reduce the risks associated
with Legionella, DELABIE recommends an annual check of the following items:
- Interchangeable cartridge: descale internal parts, and replace any worn or damaged components.
- Remove the cartridge by unscrewing the chamber anti-clockwise by hand (Fig. C).
- Mixing chamber: descale.
• In the event of malfunction during checks: clean the mechanisms and descale. Change any worn parts
if necessary.
MAINTENANCE & CLEANING
• Cleaning chrome and stainless steel: do not use abrasive, chlorine or any other acid-based
cleaning products. Clean with mild soapy water using a cloth or a sponge.
• Frost protection: drain the pipes and operate the mixer several times to drain any remaining water.
In the event of prolonged exposure to frost, we recommend taking the mechanisms apart and storing
them indoors.
For the UK market only: Tel. 01491 821 821 - email: technical@delabie.co.uk
For all other markets: Tel. +33 (0)3 22 60 22 74 - email: sav@delabie.fr
After Sales Care Support:
The installation guide is available on: www.delabie.co.uk
The installation guide is available on: www.delabie.com
EN