Troubleshooting And Maintenance; Specifications - Sunrise Medical 4000 Serie Gebrauchsanleitung

TROUBLESHOOTING AND MAINTENANCE

MAINTENANCE:
In addition to the maintenance and checks, general cleaning of both frame and upholstery can be undertaken.
To maintain its appearance the upholstery should be cleaned regularly. Light soiling can be removed by sponging
with a mild detergent and warm water, wiping in the direction of the texture. Rinse off with clean water before
allowing to dry. Do not put upholstery in a dryer. If dirt is ingrained, the surface should be scrubbed with a soft
brush. The frame should be cleaned regularly with a non-abrasive cleaner followed by polishing with a non-
abrasive automotive wax.
CHECK LIST
A periodic check of the following procedures will help sustaining the life and efficiency of your wheelchair.
Weekly:
Check de pressure of the wheels following the instructions indicated on them. Check that the cross brace's
central screw is tight and in good condition. Clean the upholstery with soapy water or adequate products.
Clean the metallic parts of the chair with a dry cloth or with special products for chromium plated or painted
surfaces. Check the wheel locks and adjust if necessary. Check wear of front and rear tyres.
Quarterly
Check and adjust if necessary: Castor play. Play in the castor forks. Push wheels' play. Offcentering of the push
wheels. Lubricate with industrial oil or grease all parts subject to friction or wear. Retighten screws and nuts. A
general revision of the chair's condition, repairing whatever is necessary.
Yearly : We recommend a complete revision once a year in a specialized establishment

SPECIFICATIONS

FOOTRESTS: 67º Swing away, detachable and height adjusting except in models 4007,4011,4002). Elevating
leg-rests optional except in models 4001 and 4031 where they are std.
ARMRESTS: Detachable in all models except in 3004 (flip back armrests) and 3005 (Fixed)
STANDARD CASTORS: Folding models: 200 mm polyurethane (pneumatic optional) Fixed models: 125 mm
polyurethane
STANDARD REAR WHEELS: 600mm polyurethane in models: 4007,4005,4001, 4021,4002 3003 and 3013
500mm polyurethane in models: 4020 . 317mm polyurethane in models: 4012,4031,4041,4010,4011.125mm
polyurethane in models: 3004,3002, and 3018 Available many options with pneumatic tyres.
WHEEL LOCKS: high push-to-lock; options: extension handles and drum brake
SPARE PARTS: Each wheelchair component is available as an spare part.
ACCESORIES : Armrests: Long padded, desk armrest and height adjusting. Foot-rests: elevating.
Wheels: Pneumatic tyres, quick release, hemiplegia system, and spoked or mag wheels. Wheel locks: extension
handles and drum brake. Others: belt, anti-tip tubes, table, crutch and dripping device supports.
12