Cleaning The Drip Tray; Cleaning The Ice Cube Container - hanseatic HSBS17990WETA2I Gebrauchsanleitung

Cleaning the drip tray

(37)
1. Remove the drip tray (37) and wash it
with clean, warm water.
2. Use a damp cloth and a small amount of
mild cleaner to wipe off the trough (38).
3. Dry the drip tray and trough.
4. Re-insert the drip tray.
Cleaning the ice cube con-
tainer
WARNING
Risk of injury!
Improper handling of the ice maker can
result in injury.
Do not insert fingers into the grinding
■
mechanism in the ice cube container!
Do not insert objects such as knives,
■
forks or similar into the grinding
mechanism.
Switch off the ice maker before re-
■
moving and cleaning (ICE OFF).
Be extremely careful when cleaning
■
the grinding mechanism.
It is possible that ice cubes have stuck to-
gether in the ice cube container (4). In this
case, it is necessary to clean the ice cube
container and remove the blockage.
Care and maintenance
Clean the ice cube container on a reg-
ular basis to prevent blockages from
forming.
Removing the ice cube container
1. Press the ICE OFF button (30) to switch
off the ice maker.
2. Disconnect the mains plug from the sock-
et or switch off the fuse.
(38)
3. Lift the ice cube container slightly (4) and
pull it out, keeping it level.
4. Remove the cover (39).
Cleaning
1. Dispose of any ice cubes down the drain.
If necessary, turn the conveyor screw (40)
clockwise or anticlockwise to loosen any
trapped ice cubes.
2. Clean the ice cube container and its cover
with a soft cloth, water and a mild cleaner.
3. Dry all parts thoroughly.
Page EN-31
(39)
(4)
Danger! ice cutter inside,
DO NOT put your hands
in.
(40)