Connection For Further Amplifiers: Terminals C,D,E - Lenz Digital Plus LZV200 Betriebsanleitung

cables LY160 and LY161. These are plug-type connections which
facilitate easy cabling.
Information on the XpressNet components is available on our web
page.
You can also install DIN-plugs, which are
available in electronics shops, to your layout
and solder the
assignment of the 5-channel DIN-plug is
shown in the figure.
Make sure that you do not mix up the
cables of the terminals L and M. This
could result in a defect in the connected
input devices.
5.5 Connection for further amplifiers: terminals
C,D,E
The data format needed for the connection of further amplifiers is on
the terminals C and D. The terminals are connected to the terminals of
the other amplifiers, which also have the same name, by means of a
twisted cable. You can easily make one of these twisted cables by
using two 'normal' cables.
Fig. 14: Using the adapters LA152
cables yourself. The
Fig. 15: Pin assignment
DIN plug (solder side)
37
E