overheating, and fire: Do not operate the appliance with the sealing
ring or rubber flap at the juice collector damaged or not inserted cor-
rectly. Do not attempt to remove the squeezing auger, while the
juicing system is still placed on the motor base. Do not pour any
liquids into the juicing system, while the juicing system is placed on
the motor base. Do not overfill the feed chute and the juice collector to
avoid overflow (see: 'Operation / Juicing Your Food'). Always keep
the motor base and power cord dry.
• Do not place or immerse the motor base or power cord in water or
any other liquid. If liquids run out or are spilled onto the exterior of the
appliance and/or liquids accumulate under the motor base, immedi-
ately unplug the appliance. Always wipe off spilled liquids immedia-
tely. If in doubt, check, whether the sealing ring of the juicing system
and the rubber flap of the pulp outlet are undamaged and mounted
correctly, before operating the appliance again. Otherwise, liquids
could run out, causing risk of short circuit and electric shock.
MOVING PARTS – RISK OF INJURIES
• Before disassembling any parts or moving the appliance: always
switch off (power switch to the central position "O") and unplug the
appliance.
• Do not attempt to corrupt the safety interlocks of the appliance to avo-
id severe injuries and damage due to the moving parts (squeezing
auger, rubber blade sleeve). Do not handle the appliance or any part
of it with violence.
• DO NOT insert your fingers or any foreign objects (e.g. hair, wide
parts of your clothing, cooking utensils, brushes) into the feed chute
or the outlets of the juice collector (pulp outlet, juice spout), while the
juicing system is placed on the motor base and the appliance is con-
nected to the power supply. For juicing, do not attempt to use any
other utensils but the provided pusher to push down the food in the
feed chute.
• During operation, do not hold your face over the appliance. Liquids
or hard parts of the processed food could be hurled out.
EN
56