Typographical Conventions; Important Information - HBM DWS2103 Kurzanleitung

DWS2103

Typographical conventions

For clear identification and improved legibility, the following conventions have
been used in this documentation:
NOTE
Important paragraphs are marked with a symbol to draw attention to
them.
Italics
"MODE"
"ENTER"
TAR
Er1250
FIT..., PW...,
AED...

Important information

NOTE
Neither the design of the device nor any technical safety aspects may be mo-
dified without the express permission of Hottinger Baldwin Messtechnik
GmbH. Any modification excludes Hottinger Baldwin Messtechnik GmbH from
any and all liability for any damage resulting therefrom.
When replacing the battery for the real-time clock, the device must be discon-
nected from the power supply (service life y 5 years).
It is strictly forbidden to carry out any repairs and soldering work on the mo-
therboards or to replace any components. Repairs may only be carried out by
persons authorized by Hottinger Baldwin Messtechnik GmbH.
The production number set at the factory cannot be changed.
When connecting the cables, the device must be disconnected from the vol-
tage supply.
A2936-1.0 en/de
Indicates external documents and files
All menus and menu commands appear in quotes, here the
main menu "MODE".
Quotes and italics are used for keys, input fields and user
input.
Bold is used for communication commands.
Underlined normal print is used for error messages.
Components of HBM's digital scale system.
The products are identified by this character
5
HBM