Alibi And Calibration Memory; Reading The Stored Files - HBM DWS2103 Kurzanleitung

DWS2103
no more than a specific fluctuation limit per time unit. With fluctuating (wind)
loads or a very high scale resolution, it is quite possible that standstill will ne-
ver be achieved. In this case, a more strongly damping filter or a lower resolu-
tion must be selected in the parameter setting.
The various options for standstill indication can be selected in the "SCALE PA-
RAMETERS-PARAMETER → STANDSTILL MON." menu (see system CD).
It is also possible to switch off the standstill conditions (but not for legal-for-
trade applications). The unit is always displayed when standstill monitoring is
switched off.
8

Alibi and calibration memory

The DWS2103 is equipped with an SD card to store the legal-for-trade para-
meters. The main print protocol information is stored on the SD card during
every printout. The data is stored encrypted on the SD card.
Storage is implemented irrespective of whether it is a legal-for-trade applica-
tion or if a printer is connected.
The following data are stored during printing (F1 when the symbol
played):
Print number, date, time, gross, net and tare values, decimal point, unit, mea-
sured value status
If vehicles are weighed, the vehicle number, goods, procedure ID, check-in
weight and check-out weight are also stored.
The SD card is only accessible after the housing has been opened. In legal-
for-trade applications, the housing is prevented from being opened by an ad-
hesive label.

8.1 Reading the stored files

The stored data can be displayed via the parameter menu "INFORMATION −
WEIGHING RESULT". The required result can be found and displayed with
the arrow keys F2 (↓) or F3 (↑), or by inputting the print number.
To search via the print number, use the keyboard to enter the print number
you are looking for. Press the F4 key to delete the search text. Start the
search with the (Enter)
NOTE
Print data and time are only correct if the real time clock has previously been set.
A2936-1.0 en/de
key.
27
is dis-
HBM