Connecting Dws2103 With Canopen Bus - HBM DWS2103 Kurzanleitung

DWS2103
5.3.3

Connecting DWS2103 with CANOpen bus

For bus termination, comply with documentation provided for the connected
devices. Only devices of the same type must be connected to the bus.
CANOpen bus
Shielding connection
CAN HIGH
CAN LOW
Voltage supply +, max. 30 V
Voltage supply ground
DWS2103
120-Ω-bus termination resistor
2.7 CAN HIGH
2.6 CAN LOW
2.2 UB
2.4 GND
K1
2.2 = U 1
OUT
Fig. 5.4: Cable assignment
A2936-1.0 en/de
DC
DWS2103
Terminal K1
1.1
2.7 CAN HIGH
2.6 CAN LOW
2.2 UB
2.4 GND
CANOpen BUS
AED/FIT
15
AED/FIT
HBM