Accessories, To Be Ordered Separately; Scale Commissioning Overview - HBM DWS2103 Kurzanleitung

DWS2103
• 4 mounting elements for panel mounting
For DWS2103 panel mounting, the cut guides are bent outward for fitting the
mounting elements. Then, the set screws are used for clamping the housing
to the panel.
• SD card (1 Gbyte) installed in DWS2103
• Quick start guide
• System CD, 1-DWS2103-DOC

3.2 Accessories, to be ordered separately

• Power pack, AC/DC 15 V / 530mA (for max. 8 load cells)
• Desktop housing, also for wall mounting, 1-TG2116 (for Dim. see Chap. 12.2)
• Junction box VKD2R-8
• Cable (connection cable for FIT..., PWxi, AED...)
4

Scale commissioning overview

The permissible supply voltage for the DWS2103 is in the range of
+10...30 V and must be adequately smoothed (rms value less residual rip-
DC
ple >10 V).
NOTE
When the C16i digital load cell is supplied via the DWS2103, the permis-
sible supply voltage is +10 ... 17 V
Type FIT, PW...i and AED... digital load cells can be operated with +10 to 30 V
A 100...240 V power supply unit is available as an accessory (AC/DC15 V / 530
mA, for max. 8 load cells). This power pack is suitable for all digital load cells.
A2936-1.0 en/de
DC
9
.
DC
HBM