Operator Dialog And Setup Parameters - HBM DWS2103 Kurzanleitung

DWS2103
13

Operator dialog and setup parameters

1. Level
SELECT DEVICE
INFORMATION
PRINT
DISPLAY
LIMIT VALUE
PEAK VALUES
TRIGGER
(IF ACTIVATED IN MODE)
The LIMIT VALUE, TRIGGER and FILLING menus are displayed subject to the selected mode of operation.
TRIGGER is not displayed when MODE − OPERATING MODE − 0: Standard
FILLING is not displayed when MODE − OPERATING MODE − 1: Trigger
LIMIT VALUE is not displayed when MODE − OPERATING MODE − 2: Filling
A2936-1.0 en/de
2. Level
SCALE
DWS2103
TARE VALUE
WEIGHING RESULT
TRIGGER RESULT
PEAK VALUE
SOFTWARE INFO
ERROR
MEASUREMENT VALUE
PARAMETER
MAIN DISPLAY
DISPLAY LINE 1
DISPLAY LINE 2
CONTRAST
LIMIT VALUE 1
LIMIT VALUE 2
LIMIT VALUE 3
LIMIT VALUE 4
Off
Net
Gross
Trigger
TRIGGER MODE
TRIGGER LEVEL
DELAY TIME
MEASURING TIME
CORRECTION FACTOR
CLEAR DEADLOAD TIME
DYN. ZERO TRACKING
3. Level
MAX, MIN, d=e, Unit
TARE VALUE
x kg
MV
MV
Min, Max, Max−Min
Version, Date
ERROR LIST
SENSOR OVERFLOW
ADU OVERFLOW
Prt01 − MW(Cur.)*
Prt02 − Trigger
Prt03 − Filling
Prt04 − Filling 2
SCALE PARAMETER
DWS2103 PARAMETER
BUS SCAN RESULT
Gross/Net
Trigger Result
LEFT, RIGHT
LEFT, RIGHT
−10...+10
FUNCTION
INPUT SIGNAL
ACTIVATION LEVEL
DEACTIVATION LEVEL
FUNCTION
INPUT SIGNAL
ACTIVATION LEVEL
DEACTIVATION LEVEL
FUNCTION
INPUT SIGNAL
ACTIVATION LEVEL
DEACTIVATION LEVEL
FUNCTION
INPUT SIGNAL
ACTIVATION LEVEL
DEACTIVATION LEVEL
Off
Level Pre-Trigger
Extern. Pre-Trigger
Level Post-Trigger
Extern. Post Trigger
Time
Band
35
4. Level
CODE
DATE, TIME
LC-ADDRESS
NUMBER
Off, On, On-Output
Net, Gross, Trigger; Peak val.
Min
Off, On, On-Output
Net, Gross, Trigger; Peak val.
Min
Off, On, On-Output
Net, Gross, Trigger; Peak val.
Min
Off, On, On-Output
Net, Gross, Trigger; Peak val.
Min
HBM