HBM DWS2103 Kurzanleitung Seite 22

22
Status line
The status line is divided into 6 horizontal segments. The following symbols or
texts are displayed, where applicable:
• ³I1I²; ³I2I²:
• GROSS, NET
• >0<
•
1,2
• OVFL
• x10
Measurement display
• The weight value is displayed with ± 7 digits with decimal point
• The physical unit is displayed with max. 4 characters
Display illumination
The LCD backlighting is always on once the power is connected
Display contrast
The LCD display contrast can be set in the menu "DISPLAY → CONTRAST"
in 21 stages from −10 to +10. The lowest contrast is −10 and the highest +10.
HBM
Displays the currently valid weighing range.
WR is not shown with just one weighing range
Indicates whether a gross measured value or net
measured value will be displayed
Displayed when the measured value is 0 ± 0.25d
(true zero).
Displays the overshoot of the set limit value 1
and / or 2
Overflow is displayed when at least one load cell
or the entire scale is loaded with more than 160 %
of its maximum capacity
10-fold resolution switched on
DWS2103
A2936-1.0 en/de