Parameter Factory Settings - HBM DWS2103 Kurzanleitung

28
9

Parameter factory settings

When the DWS2103 is delivered, it comes with specific factory settings:
• The (7-digit) production number is entered
As the DWS2103 has undergone certain tests during production, the following
information can deviate from zero:
• Legal-for-trade counter (Menu "INFORMATION SCALE" or F1 key with
symbol "i")
• Sensor-overflow counter (Menu "INFORMATION BUSSCAN")
Parameter
COM1, baud rate
COM1, parity bit
COM2,COM3,COM4, function
COM2,COM3,COM4,baud rate
COM2,COM3,COM4,parity bit
Printing, ESC sequences
Basic scale function
Menu access
When restoring to the factory settings ("DWS2103 FACTORY SETTINGS"
menu), the parameters described above are set to their default values.
The DWS2103 does not have its own measurement signal condition. The
settings (factory settings) of the active AED/FIT are shown in the menus.
HBM
Default value
38400
even
OFF
9600
even
0
Standard
5
DWS2103
Explanation
switched off
switched off
non−automatic weighing instrument
All menus
A2936-1.0 en/de