Jacuzzi J-300 series Montageanweisung Und Bedienung Und Wartung Seite 38

on the device connected). All functions are performed through
the remote.
- While the music is playing the remote screen will display and-
continually scroll through the following: Artist, Album, Song
and Track information.
- For operational functions refer to the "External Media Device
Playback" section.
Operating the USB drive:
- Turn power OFF to the stereo unit.
- Plug in your USB device into the "USB" connection on the
stereo.
- Turn power ON to the stereo unit and the stereo remote.
- The LCD screen on the remote will display the following: "Wel-
come, " "USB, " "Load, " "TOL XX" (final display will vary depend-
ing on the whether the USB holds folders or files). All functions
are performed through the remote.
- While the music is playing the remote screen will display and-
continually scroll through the following: Title, Song, Artist, Al-
bum, Dir, Music and Track information.
- For operational functions refer to the "External Media Device
Playback" section.
Connecting Your Auxiliary Player Using the 3.5 mm Cable:
- Plug one end of the cable to "Aux" connection on the stereo.
- Plug the other end of the supplied cable into the phone jack
connection on the iPod/MP3 Player.
- All playback operations are conducted via the Auxiliary Play-
er. The stereo remote functions do not work on the external
Auxiliary Player (except volume control).
AUX AUX
Connecting Your Bluetooth Device:
- Turn power ON to the stereo unit.
- From your Bluetooth device, make sure the Bluetooth feature
is ON.
- Follow the pairing instructions for your Bluetooth device and
connect to the "BLUEWAVE" device that appears on your
screen.
- When asked for a password, enter the code "0000. "
- The remote LCD screen will display, "BT CONNECTED" if the
process was successful.
Operating Your Bluetooth Device:
- Press the seek up or down buttons to scroll through the tracks
(on the remote).
USB USB
- Press the volume up or down buttons to adjust volume level be-
tween 0 to 30 (on the remote).
- Any other playback operations are conducted via the Blue-
tooth device.
Wireless Remote Battery Replacement Procedure
- Turn the remote unit over and locate the bat-
tery door.
OPEN CLOSED
- Rotate the battery door, with a coin, coun-
OPEN CLOSED
terclockwise to the Open position. When the
door is unlocked it will pop up slightly.
OPEN CLOSED
- Remove battery door by lifting the door up-
ward.
OPEN CLOSED
- Replace battery using CR2430 or equivalent
CR2430
3V
OPEN CLOSED
- Reinstall the battery cover, using the coin ro-
tate the door to the Close position.
Note: Remote unit is water resistant not waterproof. Although
it is designed for use while in the spa, it should never be left
in the spa while the cover is on and spa is not in use. The re-
mote should be stored in a dry location such as the stereo re-
mote pouch (if applicable) located on the outside of the spa
cover or within your home.
Audio System Stereo Specifications
Power supply: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.7-14.4V (DC)
Tuner
FM radio sensitivity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8uV
FM radio reception: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stereo
38