Room Monitoring - AUDIOLINE TERMINAL 2 Bedienungsanleitung

Your TERMINAL 2 is preset to the German language in the factory. If you want to change over
to English, please proceed as follows:
1. Press the MENUE button.
2. Press the button as many times as necessary until the message "SERVICE" appears
in the display.
3. Press the OK button. The message "Pin Code >>" will appear in the display.
4. Now enter the five-digit PIN code using the keypad (factory setting 0 0 0 0 0) and confirm
the entry with OK. The message "MSN ?" will appear in the display.
5. Now press the
?/Language ?" appears in the display.
6. Confirm with the OK button. The message "ENGLISCH ?" will appear in the display.
7. Now choose between the two languages "DEUTSCH" and "ENGLISCH" using the
buttons.
8. Confirm with OK and the selected language will be set.
9. You can exit programming with the MENUE button.
5.8

Room monitoring

You can also listen in to your home or office using your TERMINAL 2. To do this, it will be
necessary to programme MSN 3 with the associated phone number (see 3.9, "Assigning MSN
phone numbers") If room monitoring is switched on, you can then listen in to the room from an
external connection using the phone number MSN3. If you want to use room monitoring, you
should not pass on your MSN3 phone number to other people.
1. Press the MENUE button.
2. Press the
appears in the display.
3. Press the OK button. The message "Pin Code >>" will appear in the display.
4. Now enter the five-digit PIN code using the keypad (factory setting 0 0 0 0 0) and
confirm the entry with OK. The message "MSN ?" will appear in the display.
5. Now press the
Sitting ?" appears in the display and confirm with OK.
6. Select the required setting "Baby Sit Enable ?" or "Baby Sit Disable ?" with the
buttons.
7. Confirm the entry with the OK button and the message "Baby Sitting ?" will appear in
the display once more.
8. You can exit programming with the MENUE button.
56
- Programming -
button as many times as necessary until the message "Sprache
button as many times as necessary until the message "SERVICE"
button as many times as necessary until the message "Baby
and
or