Storing, Deleting Or Changing Numbers In The Phone Book; Entering New Telephone Numbers - AUDIOLINE TERMINAL 2 Bedienungsanleitung

4.11 Storing, deleting or changing numbers in the phone book

A total of 50 telephone numbers with associated names can be stored in the TERMINAL 2
phone book. 10 of these numbers can be dialled via the direct dial buttons.
Note: If a phone number is stored in the phone book and you are called by this subscriber,
then the name stored in the phone book will appear in the display and not the caller's phone
number. The caller's phone line must, of course, be capable of transmitting the phone number.
4.11.1

Entering new telephone numbers

1. Press the MENUE button.
2. Press the button as many times as necessary until the " Phone Book ?" setting
appears in the display.
3. Confirm with the OK button.
4. Select the "Program Phone Book ?" setting using the
OK. The message "Phone book >>(1-50)" will appear in the display.
5. Your telephone will now indicate a free storage location in the phone book. If you want to
use the suggested location, confirm with the OK button and go to Step 8. Remember that
you will later be able to call up the first 10 storage locations using the direct dial buttons.
If you want to use a particular storage location, press the C button and continue with the
next step. If there is no longer a free storage location available, a storage location will not
be suggested by the TERMINAL 2. In this case, continue with the next step.
6. Now select the required storage location in which the telephone number is to be stored.
To do this, either press one of the 10 direct dial storage locations or enter a storage
location between 11 and 50 and confirm with OK.
7. If the selected storage location is already occupied, the display will show "Overwrite ?".
Confirm overwriting with OK or press the C button and go to Step 6.
8. Now enter the required name by repeatedly pressing the appropriate numbers.
9. Example: You want to enter the name "Peter".
Press: 1 x button 7, 2 x button 3, 1 x button 8, 2 x button 3, 3 x button 7
- To enter a space, press the "1" button once.
- Letters can be deleted with the
- If you want to enter the same letter twice in succession or two letters which are on the
same button one after the other, wait ca. 1 second before pressing the button again.
10. Confirm the name with OK.
11. Now enter the full telephone number and confirm with OK. Incorrect numbers can be
deleted with the
12. The message "Location >>(1-50)" will appear in the display once more and you can store
further telephone numbers by continuing with the entry from Step 5. If you do not wish to
store any more telephone numbers, exit programming with the MENUE button.
46
- Operation -
button.
or
button.
button and confirm with