Assigning Msn Phone Numbers; Assigning Ring Tones To Msn Phone Numbers - AUDIOLINE TERMINAL 2 Bedienungsanleitung

3.9

Assigning MSN phone numbers

For a multiple device connection, your network provider offers you several MSNs (Multiple
Subscriber Numbers) that you can be called on. You can assign up to 3 MSNs to your
TERMINAL 2, i.e. your phone will only signal a call when a call is made using these assigned
MSN phone numbers. If only MSN 1 is assigned to the telephone, it will only respond to this
telephone number when a call is received. The country code (49) and the local dialling code
are not part of the MSN. To differentiate between the three MSN phone numbers, there are
three indicators MSN1, MSN2 and MSN3 on your telephone. In addition, you can also allocate
each MSN its own ring tone. In this way, calls can also be differentiated acoustically.
Note: No MSN phone numbers are assigned when the phone is supplied. In this case, your
TERMINAL 2 will respond to all MSN phone numbers that are allocated to you by your network
provider.
To assign the three MSN phone numbers, please proceed as follows:
1. Press the MENUE button.
2. Press the button as many times as necessary until the message "SERVICE" appears
in the display.
3. Press the OK button. The message "Pin Code >>" will appear in the display.
4. Now enter the five-digit PIN code using the keypad (factory setting 0 0 0 0 0) and confirm
the entry with OK. The message "MSN ?" will appear in the display.
5. Confirm with OK. The display will show "MSN 1 ?". If an MSN has already been entered,
this MSN phone number will also appear.
6. Now press the OK button and enter the required MSN phone number for MSN 1 using the
number pad.
7. Confirm the entry with the OK button. The MSN 1 entered has now been saved and the
display will show MSN 2.
8. Then press the OK button and enter the MSN phone number for MSN 2 using the number
pad.
9. Confirm the entry with the OK button. The MSN 2 entered has now been saved and the
display will show MSN 3.
10. Then press the OK button and enter the MSN phone number for MSN 3 using the number
pad.
11. Confirm the entry with the OK button. The MSN 3 entered has now been saved and the
display will again show MSN 1.
12. You can check the three MSN phone numbers again using the
13. Exit the programming mode by pressing the MENUE button.

3.10 Assigning ring tones to MSN phone numbers

When you have entered the MSN phone numbers, calls will be assigned to the three indicators
MSN1, MSN2 and MSN3. So that you can now also differentiate between the three phone
numbers acoustically, each MSN phone number can be assigned a different ring tone.
1. Press the MENUE button.
2. Press the button as many times as necessary until the message "SERVICE" appears
in the display.
40
- Setting up -
and buttons.