Changing Telephone Numbers; Deleting Telephone Numbers From The Phone Book - AUDIOLINE TERMINAL 2 Bedienungsanleitung

4.11.2

Changing telephone numbers

1. Press the MENUE button.
2. Press the button as many times as necessary until the " Phone Book ?" setting
appears in the display.
3. Confirm with the OK button.
4. Select the "Edit Phone Book ?" setting using the
The message "Input Name / Quit ?" will appear in the display.
5. Now select the required telephone number which is to be changed. To do this, enter the
required initial letter of the name by pressing the appropriate number and confirm with
OK. If you want to look through the whole phone book, do not enter a letter but confirm
directly with OK.
Note: If no phone number with the initial letter entered has been stored, the display will show
the error message "No Matched Record!" and a new letter can be re-entered after about 4
seconds.
6. The display shows a telephone number with the required initial letter. If several names
with the same initial letter have been stored, you can page through the phone book using
the and
book using the
7. Confirm with OK. "Input New Name/Quit" will appear in the display and you will see the
stored name.
8. Delete the name with the
9. Confirm with OK. The display will show "Input New No./Quit" and you will see the stored
telephone number.
10. Delete the number with the
11. Confirm with OK. The display will again show the message "Input Name/Quit" and you
can change further telephone numbers by continuing with the entry from step 6. If you do
not wish to change any more telephone numbers, exit programming with the MENUE
button.
4.11.3

Deleting telephone numbers from the phone book

1. Press the MENUE button.
2. Press the button as many times as necessary until the " Phone Book ?" setting
appears in the display.
3. Confirm with the OK button.
4. Select the "Delete Phone Book ?" setting using the
The message "Input Name / Quit ?" will appear in the display.
5. Now select the required telephone number which is to be changed. To do this, enter the
required initial letter of the name by pressing the appropriate number and confirm with
OK. If you want to look through the whole phone book, do not enter a letter but confirm
directly with OK.
Note: If no phone number with the initial letter entered has been stored, the display will show
the error message "No Matched Record!" and a new letter can be re-entered after about 4
seconds.
- Operation -
buttons. If you have not entered an initial letter, page through the phone
and buttons until you have found the required number.
button and enter a new name.
button and enter the new telephone number.
or button and confirm with OK.
or button and confirm with OK.
47