AUDIOLINE TERMINAL 2 Bedienungsanleitung Seite 53

Phone silent
A1. Confirm with the OK button.
A2. Choose between the options "Ringer OFF ?" and "Ringer ON" using the
buttons.
A3. Confirm with the OK button. If the ringer is switched off, the symbol
display.
A4. You can exit programming with the MENUE button.
Global block
B1. Confirm with the OK button.
B2. Using the and
"G-Block Enable ?"
"G-Block Disable ?"
"G-Block Setting ?"
B3. Confirm with the OK button. If you have activated the dialling block, you should now enter
any numbers that are still free and the message
you have deactivated the dialling block or if you have already entered the required free
numbers, you can exit programming with the MENUE button.
B4. To store the free numbers, press the OK button again and the
as necessary until the setting "G-Block Setting ?" appears in the display.
B5. Confirm with the OK button and the message "G-Block NR 1 >" will appear in the display.
B6. Now enter the first of the five free numbers using the number pad. Incorrect numbers can
be deleted with the
not possible to enable a particular dialling code.
B7. Confirm the free number with the OK button. The next free number will appear in the
display.
B8. Now enter the next free numbers and confirm in each case with OK. After the fifth free
number, the display will again show the message "G-Block Setting?". If you do not want to
make an entry for a free number, simply confirm the blank display with OK.
B9. You can exit programming with the MENUE button.
Partial block
C1. Confirm with the OK button.
C2. Using the and
"P-Block Enable ?"
"P-Block Disable?"
"P-Block Setting ?"
C3. Confirm with the OK button. If you have activated the dialling block, you must now still
enter the phone numbers that you wish to block. The symbol
the display. If you have deactivated the dialling block or if you have already entered the
required blocked numbers, you can exit programming with the MENUE button.
C4. To store the blocked numbers, press the OK button again and the
times as necessary until the setting "P-Block Setting ?" appears in the display.
C5. Confirm with the OK button and the message "P-Block NR1 >" will appear in the display.
- Programming -
buttons, choose between the options
= Dialling block will be activated
= Dialling block will be deactivated
= Enter the free numbers
button. Note: Only complete phone numbers can be enabled. It is
buttons, choose between the options
= Number block will be activated
= Number block will be deactivated
= Enter the blocked numbers
123
will appear in the display. If
button as many times
123
button as many
and
will appear in the
will appear in
53