Inlet Screen Installation - Agilent Technologies TV 801 Navigator Bedienungshandbuch

17 Technical Information

Inlet Screen Installation

Inlet Screen Installation

Figure 23
The inlet screen included in the SQ 306 prevents the blades of the
pump from being damaged by debris greater than 0.7 mm diameter.
The inlet screen, however, does reduce the pumping speed by about
10 %.
The inlet screen is fitted in the upper part of the pump, as shown in
the figure.
Figure 24
The screen can be mounted on each pump.
The screen can be removed as shown in the following figure.
238/252 TV 801 Navigator User Manual / 87-900-953-01 (G)