Package Contents - DeWalt DW872 Bedienungsanleitung

17 Do not abuse cord
Never pull the cord to disconnect from the
socket. Keep the cord away from heat, oil and
sharp edges.
18 Store idle tools
When not in use, tools must be stored in a dry place
and locked up securely, out of reach of children.
19 Maintain tools with care
Keep the tools in good condition and clean for
better and safer performance. Follow the
instructions for maintenance and changing
accessories. Keep all handles and switches dry,
clean and free from oil and grease.
20 Repairs
This tool is in accordance with the relevant safety
regulations. Have your tool repaired by an
authorised D WALT repair agent. Repairs should
E
only be carried out by qualified persons using
original spare parts; otherwise this may result in
considerable danger to the user.
Additional safety rules for chopsaws
• Keep hands away from the cutting blade.
Never cut workpieces that require manual action
closer than 15 cm from the rotating cutting blade.
• Do not cut workpieces less than 1.2 mm in
thickness when using the cutting blade supplied
with this tool.
• Do not operate this tool without guards in place.
• Do not perform any operation freehand. Use the
material clamp to clamp the workpiece securely.
• Never reach in the back of the cutting blade.
• Always position the tool on a flat, stable surface
that is well maintained and free of loose
materials, e.g. chips and cut-offs.
• Use a holder or wear gloves when handling a
cutting blade.
• Before using, inspect the cutting blade for cracks
or flaws. Discard the cutting blade if a crack or
flaw is evident.
• Make sure the cutting blade is not contacting the
workpiece before the tool is switched on.
• In operation, avoid bouncing the cutting blade or
giving it rough treatment. If this occurs, stop the
tool and inspect the cutting blade.
• Do not operate the tool while standing in line with
the cutting blade. Keep other persons away from
the work area.
DW872.P65
• Be aware of cutting chips and the material being
cut. They may be sharp and hot. Allow cut off
parts to cool before handling.
• Switch off the tool and wait for the cutting blade
to stop before moving the workpiece or changing
the settings.
• Do not use cutting fluids. These fluids could
ignite, cause electrical shock, or chemically
attack the plastic lower guard.
• Use only the cutting blades specified in this
manual. Never use abrasive cut-off wheels or
other types of cutting blade.
• Do not cut concrete, brick, tile or ceramic materials.
• Do not cut cast-iron materials.
• Never cut magnesium materials.
• Do not cut electrically live material.
• Use this tool in a well-ventilated area. Do not
operate the tool near flammable liquids, gases or
dust. Sparks or hot chips from cutting or arcing
motor brushes may ignite combustible materials.
• Warning! Use of this tool can generate dust
containing chemicals known to cause cancer,
birth defects or other reproductive harm.
Use appropriate respiratory protection.
Residual risks
The following risks are inherent to the use of these
machines:
- injuries caused by touching the rotating parts
- injuries caused by disruption of the cutting blade
These risks are most evident:
- within the range of operation
- within the range of the rotating machine parts
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
- Impairment of hearing.
- Risk of accidents caused by the uncovered parts
of the rotating cutting blade.
- Risk of injury when changing the blade.
- Risk of squeezing fingers when opening the guards.

Package contents

The package contains:
1 Toothed chopsaw
1 Cutting blade
25
E N G L I S H
10-09-2001, 16:26
25