Ec Declaration Of Conformity; Technical Data - DeWalt DW872 Bedienungsanleitung

TOOTHED CHOPSAW DW872
Congratulations!
You have chosen a D WALT power tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical data

Voltage
(U.K. & Ireland only)
Power input
No-load speed
Blade diameter
Blade bore
Blade body thickness
Blade kerf thickness
No. of blade teeth
Cross-cutting capacity at 90°
circular
square
rectangular
angular
Cross-cutting capacity at 45°
circular
square
rectangular
angular
Weight
Fuses:
Europe 230 V tools
U.K. & Ireland 230 V tools
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Fire hazard.
DW872.P65
DW872
V 230
V 230/115
W 2,200
-1
min 1,300
mm 355
mm 25.4
mm 1.8
mm 2.2
70
mm 130
mm 100 x 100
mm 75 x 130
mm 92 x 92
mm 79
mm 79 x 79
mm 79 x 123
mm 56 x 56
kg 22.5
10 Amperes, mains
13 Amperes, in plugs
23
Sharp edges.
EC-Declaration of conformity
DW872
D WALT declares that these power tools have been
E
designed in compliance with: 98/37/EEC,
89/336/EEC, 73/23/EEC, EN 55014-2, EN 61029,
EN 55014, EN 61000-3-2 & EN 61000-3-3.
For more information, please contact D
address below, or refer to the back of the manual.
Level of sound pressure according to 86/188/EEC &
98/37/EEC, measured according to EN 61029:
L (sound pressure)
pA
L (acoustic power)
WA
* at the operator's ear
Take appropriate measures for the
protection of hearing if the sound
pressure of 85 dB(A) is exceeded.
Weighted root mean square acceleration value
according to EN 61029:
Director Engineering and Product Development
Horst Großmann
D WALT, Richard-Klinger-Straße 40,
E
D-65510, Idstein, Germany
10-09-2001, 16:26
E N G L I S H
WALT at the
E
DW872
dB(A)* 95
dB(A) 108
DW872
< 2.5 m/s 2
23