attika V I S I O 2 Bedienungsanleitung Seite 137

English
VISIO 3 - installation distances - panels
attentIOn!
Insulated chimney (acc.)
all the way down to the
collar
Reflector plate
Distance from reflector
to back wall (see table)
Panel type
12.5 mm fermacell with
25 mm mineral wool
50 mm calcium silicate boards
134
RAIS/
A-A
Distance to back wall
attika
- User manual for VISIO
clearance height above
burning chamber
min. 698 mm
convection area is placed
just below the sloped plate.
to guide the hot air out of
the convection outlets, RaIS
recommends to mount a
sloped, non-combustible and
insulating plate (fermacell +
mineral wool or similar) above
the outlets.
fermacell is facing down.
Installation height
min. 385 mm
50 mm
37,5 mm