attika V I S I O 2 Bedienungsanleitung Seite 140

English
VISIO 3 - installation distances- brick wall
Reflector plate
B
Distance from reflector to
non-combustible 0 mm
(10 mm is recommended.
RAIS/
A-A
clearance height above
burning chamber
min. 698 mm
attika
- User manual for VISIO
A-A
any convection area is placed
just below the sloped plate.
to guide the hot air out of
the convection outlets, RaIS
recommends to mount a
sloped, non-combustible and
insulating plate (fermacell +
mineral wool or similar) above
the outlets.
fermacell is facing down.
Installation height
min. 385 mm
construction of sloped plate.
25 mm mineral wool
12.5 mm fermacell
137