Using The Led Torch; Troubleshooting - Silvercrest HG02519 Bedienungs- Und Sicherheitshinweise

Using the LED torch

To switch on the light, press and hold the
Display / LED button 5 on the side of
the product about 2 seconds.
Press and hold the Display / LED button
5 again to switch the light OFF again.

Troubleshooting

= Problem
= Cause
= Solution
The power bank 6 is not being
charged.
It may be that the power bank is not
connected properly.
Check that it is connected.
A connected device is not being
charged.
The battery is drained.
Charge the battery.
The device is not connected.
Check that it is connected.
Lightly press the Display / LED button 5
to begin the charging process.
GB 17