Steam Delivery; Cleaning The Machine; Technical Features - Quick MILL 0975 Bedienungsanleitung

7. Steam delivery

(The appliance must be ready to operate)
- lift the switch 4 to deliver steam. The indicator light 5 switches on. The indicator 3 switches on
until the right temperature is reached. When the light switches off, the machine is ready to deliver
steam.Half-fill a suitable container with milk. Submerge the steam spout (10) in the milk. Turn
on the tap (9). As soon as a non-stop steam comes out, put the steam spout just under the level of
the milk. By foaming the milk you must hear a flapping noise which is caused by the air outflow.
That means that you are doing right. Milk foams at 77°, therefore first you must foam the milk
and after you must heat it
- After each delivery of steam your must put button (2) in up position for the manual recharge of
the boiler and wait till the boiler is full. Than put it in down position.
If this rule is not respected, warranty will automatically become void.

8. Cleaning the machine

A careful cleaning of the machine is very important for its reliability, its life and the operating
safety.
- Clean the filter weekly with a brush and fresh water moving it from the filter holder.
- Even if coffee flows out regularly, clean the gasket of the group monthly using a curved utensil
similar to a pipe-pick.
- If water is very hard, each 2/6 months decalcify it using a decalcifying product for coffee
machines or lemon (no vinegar).

Technical Features

Dimensions: L 22
Net weight : 17 kg
Power : 1500 Watt
Voltage: 230V 50Hz
Or 110V 60 Hz
Or 100V 50/60 Hx (Japan)
Boiler Capacity: 0,75 lt.
,5 x H 38,5 x D 40 cm.