Stopping The Tractor; Differential Lock; Power Take-Off - GOLDONI 3070V Star Bedienung Und Instandhaltung

4.5 STOPPING THE TRACTOR

a) Move the accelerator lever (N° 8 fig.1) up to the idling position and release the
accelerator pedal (N° 15 fig.1).
b) Depress the clutch pedal (N° 27 fig.1).
c) Move the final drive lever (N° 28 fig.1), the gearshift lever (N° 17 fig.1) and,
when applicable, lever (N° 32. fig.1) to the neutral position.
d) Engage the parking brake (N°18 fig.1).

4.6 DIFFERENTIAL LOCK

The tractor is equipped with an electro-hydraulic differential lock on the rear
axle. The differential can be locked by pushing button (N°20 fig.1).
Release the button to automatically disengage the differential lock.
Only use the differential lock with low gears after having reduced
the engine speed. Do not use the differential lock near or when
driving around bends. If the differential lock fails to disengage, reduce the
engine speed, stop the tractor and disengage the differential.

4.7 POWER TAKE-OFF

See fig. 1
Disengage the clutch by moving lever (N° 30 fig.1) up.
Engage the power take-off with lever (N° 25 fig.1) in the position where it is
synchronized with the ground speed of the tractor, or independent, at 540 rpm.
Engage the clutch by lowering lever (N° 30 fig.1).
Profile: 1"3/8 ASAE with 6 splines
Speed: 540 rpm with an engine speed of 2430 rpm
Direction of rotation: clockwise
Wheels/synchronised power take-off ratio:
• With the power take-off at 540 rpm, ratio: ¼.67 rpm, direction of rotation,
clockwise when using forward gears.
For machines equipped with 750 or 1000 rpm power take-off, after having
selected the synchronised or independent position and after having disengaged
the clutch as above engage the 750 or 1000 rpm power take-off with lever (N°21
fig.1).
Profile: 1"3/8 ASAE with 6 splines
Speed: 750 rpm with an engine speed of 2602 rpm
Speed: 1000 rpm with an engine speed of 2068 rpm
Direction of rotation: clockwise
75