Herunterladen Inhalt Inhalt Diese Seite drucken

Use Procedure; Controller Startup; Pump Shutdown - Varian Turbo-V 700HT 969-9445 Bedienungshandbuch

Vorschau ausblenden Andere Handbücher für Turbo-V 700HT 969-9445:
Inhaltsverzeichnis

Werbung

USE PROCEDURE

Controller Startup

To startup the controller plug the power cable into a
suitable power source and set the line switch to the
position 1.
Starting the pump
To start the pump press the START push-button on the
controller front panel.

Pump Shutdown

To shutdown the pump press the STOP push-button on
the controller front panel.
MAINTENANCE
The Turbo-V 700HT series controller does not require
any maintenance. Any work performed on the controller
must be carried out by authorized personnel.
When a fault has occurred it is possible to use the
Varian repair service. Replacement controllers are
available on an advance exchange basis through
Varian.
!
Before carrying out any work on the controller,
disconnect it from the supply.
Controller 969-9445 and 969-9545 rear panel
WARNING!
1. Logic input signals connectors
supplied with link).
2. Logic output signals connector and pump current monitor.
3. Power output connector (120 Vac,1 A for pump
cooling fan).
4. Pump cord.
5. Controller power entry module consisting of mains fuses,
voltage change over, mains socket and EMC filter.
6. Power output connector (120 Vac) for vent device,
forepump contactor coils etc.
7.
Provision for RS232 communication port connector
(provide as an option).
If a pump is to be scrapped, it must be disposed off in
accordance with the specific national standards.
Meaning of the "WEEE" logo found in labels
The following symbol is applied in accordance with the
EC WEEE (Waste Electrical and Electronic Equipment)
Directive.
This symbol (valid only in countries of the European
Community) indicates that the product it applies to
must NOT be disposed of together with ordinary
domestic or industrial waste but must be sent to a
differentiated waste collection system.
The end user is therefore invited to contact the supplier
of the device, whether the Parent Company or a
retailer, to initiate the collection and disposal process
after checking the contractual terms and conditions of
sale.
67
INSTRUCTIONS FOR USE
(mating connector
DISPOSAL
87-900-877-01 (E)

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Turbo-v 550969-9444969-9544Turbo-v 700ht969-9445969-9545

Inhaltsverzeichnis