General Instructions; Cancel Irrigation; Battery Charge Level - FLORABEST FBC 7 B2 Bedienungsanleitung

General instructions

■ Activate programming mode by pressing the M button
GB
after the other or switch between the following setting options by pressing the M button
― System time
― Irrigation start time 1
― Irrigation duration 1
― Irrigation start time 2
― Irrigation duration 2
― Irrigation interval
― Standby (Programming mode terminated and irrigation programme active).
■ After about 1 minute without any entries being made, the appliance returns to standby mode.
All values that have already been programmed are retained.
■ By briefl y pressing the
adjustments to the programmed values. By pressing and holding the
programming mode and the values that have already been programmed will be retained.

Cancel irrigation

♦ Press the
8

Battery charge level

In the event of a low battery charge level, the symbol
For as long as the symbol fl ashes, irrigation is not possible. Irrigation that may be in progress will be
terminated.
NOTE
► The programming is saved for 120 seconds. If battery replacement takes longer, the appliance
must be reprogrammed.
10
button you can jump back one step in the programming mode to make
8
button stop irrigation that is already in progress.
. You can either make all the settings one
5
button
fl ashes. All other displays are deactivated.
C
5 :
8 you can terminate
FBC 7 B2