Auping Ultimate Climate Gebrauchsanweisung Seite 43

3859_bw.qxp:bw 30-10-2008 14:23 Pagina GB17
A. Positioning the main mattress body
Put the bed in the flat position.
Place the mattress body (A) on the
mesh base (see fig. 6) .
Check the position of the connectors!
Press down with two hands on the
mattress where
connectors are positioned (see fig. 7) .
The mattress base will connect with an
audible click.
B. Installing the comfort layer
fig. 6
Place the comfort layer (B) on the
mattress body with the heating element
("this side up") in such a position that
the two small cables come together in
the same corner (see fig. 8) .
Place the comfort layer precisely in the
centre without any folds or creases.
fig. 7
the mattress
Press the plugs (D) together until you
hear a click (see fig. 9) . Then fold the
fig. 8
fig. 9
GB17