Safety Instructions - Auping Ultimate Climate Gebrauchsanweisung

3859_bw.qxp:bw 30-10-2008 14:23 Pagina GB4

3. Safety instructions

Read the instructions carefully
before using the mattress.
Damaged power supply leads
should be replaced solely by the
manufacturer, its service division or
a similarly qualified person, with a
view to preventing any hazard.
The Ultimate Climate mattress can
only be used in combination with an
Auping Royal mesh base with
all components/parts assembled
correctly and for the right purposes.
Check that
indicated on the transformer is the
same as the mains voltage in the
house.
Make sure that the cables cannot
become
transformer and the connecting plug
in the Royal Transformer and Plug
Box (optional) or somewhere with
sufficient space and ventilation.
These parts release heat and must
therefore not be covered and may
not be placed near devices that give
off heat.
Disconnect the bed from the power
supply before cleaning. Pull the plug
out of the socket.
GB4
the input voltage
trapped. Place the
The maximum setting for use at night
is setting 4 (maximum 4 indicator
bars on the remote control display
switched on).
Do not switch on the Ultimate
Climate mattress when the lead,
transformer or the mattress is
damaged. Have the faulty parts
replaced by the manufacturer.
Do not switch on the heating or
drying function if the mattress is wet,
for instance after removing stains
(see section 9).
When the Ultimate Climate mattress
is switched on, do not cover the
mattress with, for example, another
mattress or a load of laundry.
Use the mattress only as an upper
mattress.
Do not use the changeable comfort
layer without the mattress cover.
Do not insert sharp objects such as
pins into the mattress.
Climate mattresses are not suitable
for children, disabled persons or for
people that are insensitive to heat.