Auping Ultimate Climate Gebrauchsanweisung Seite 35

3859_bw.qxp:bw 30-10-2008 14:23 Pagina GB9
the start time. Press SET to
confirm.
7. Then use the + and -- keys to set
the minutes. Again press SET to
confirm. The display shows 'off'.
8. Press the + and -- keys to set the
end time. First set the hours for the
end time.
Press SET to confirm.
9. Then use the + and -- keys to set
the minutes. Again press SET to
confirm. A single tone will sound to
confirm that the program is saved.
B. Starting the heating program every
day
You can also choose to have the
program run daily.
1. Press and release programming
key P.
2. Press the heating key for the foot
zone or the body zone.
3. Select 'on AUTO'.
4. Set the level of both the body and
foot zones by pressing a number of
times on the + and -- keys.
5. Press confirmation key SET once to
change the start time.
The display shows 'on'.
6. Press the + and -- keys to set the
start time. First set the hours for
the start time.
Press SET to confirm.
7. Then use the + and -- keys to set
the minutes. Again press SET to
confirm. The display shows 'off'.
8. Press the + and -- keys to set the
end time First set the hours for the
end time.
Press SET to confirm.
9. Then use the + and -- keys to set
the minutes. Again press SET to
confirm. A single tone will sound as
soon as the program is installed.
The set programme will now start and
stop daily at the programmed times.
C. Manual drying controls (on/off)
Press the drying key to switch on the
drying function. A single tone will
sound to confirm that the drying
function is switched on and the lamps
under the bed will start flashing. The
head and foot ends of the Royal mesh
base are automatically raised by 10 cm.
If you wish to stop the drying function
before the automatic switch-off after
2 hours 45 minutes, just press the
drying key for 2 seconds at any time.
A double tone will sound to confirm
that the drying function is switched off.
GB9