Restore Factory Settings - Auping Ultimate Climate Gebrauchsanweisung

3859_bw.qxp:bw 30-10-2008 14:23 Pagina GB12
Example 1: Changing from programmed
preheating to manual heating
If you generally go to bed at about
11:00 p.m. you can program the
Ultimate Climate so that heating starts
at 9:00 p.m. When you get into bed
you can turn the level lower or to zero
by hand. The heating will continue at
this level until the program switches
the heating off, for example at 8:00
a.m. the next morning.
Example 2: Interrupting automatic
drying
It may occur that you are still lying in
bed when the program starts the
drying process. For example if you are
ill or want to get up later than
regularly. In that case you can switch
the drying process off by hand by
pressing the drying key for about
2 seconds. The program will then skip
the drying process for a day. The next
day the program will start drying at the
programmed time.
GB12

4.3.6 Restore factory settings

Press the SET key during 10 seconds.
A double tone will sound. All personal
settings will be removed and the
factory settings restored.