Inhaltsverzeichnis
Werbung
Picture Menu
The Picture menu is used for adjusting the picture.
Note
These items may not be available, depending on the type of input signal. For details, see "Input
Signals and Adjustable/Setting Items" (1 page 75).
Picture Mode
Reset
You can select the picture viewing mode that best suits the type of
picture or the environment.
Dynamic: Project bright images with sharp, vivid picture quality.
Standard: Ideal for projecting TV programs, concerts, and other video
images.
Cinema: Picture quality suited for watching movies.
User 1, User 2, User 3: You can adjust the quality of the picture to suit
your taste and then store the settings. Once the settings are stored, you
can view the picture with the adjusted picture quality by pressing the
PICTURE MODE button on the remote control.
To store the settings
1 Select User 1, User 2, or User 3.
2 Adjust the items you want in the menus.
Tip
You can also store the settings if the picture quality is adjusted in
"Dynamic", "Standard" or "Cinema". To reset everything to the factory
settings, select "Reset" from the menu.
The factory default settings are as follows.
User 1: Same as "Dynamic" setting.
User 2: Same as "Standard" setting.
User 3: Same as "Cinema" setting.
Resets all currently selected picture mode settings to their default values.
(1 page 42)
43
Werbung
Inhaltsverzeichnis
