Inhaltsverzeichnis
Werbung
Power Saving
Input-A Signal Sel.
Color System
Lamp Setting
Sets the power saving mode.
When set to "On", the projector goes into power saving mode if no
signal is input for 10 minutes. At that time, the ON/STANDBY
indicator lights in orange, then the screen becomes dark. In power
saving mode, the power saving mode is cancelled if a signal is input
or any button on the projector or the remote control is pressed. If you
do not want to set the projector to power saving mode, select "Off".
Selects the type of signal input from the equipment connected to
the INPUT A connector.
Selects the type of signal input from the equipment by selecting
"Input-A" with the INPUT button.
Auto: Selects the input signal type automatically.
Computer: Inputs the signal from a computer.
Video GBR: Inputs the signal from a TV game or HDTV broadcast.
Component: Inputs the component signal from a DVD player/
recorder, Blu-ray Disc player/recorder, digital tuner, etc.
Note
When the input signal is not displayed correctly with this item set to
"Auto," select the item according to the input signal.
Selects the color system of the input signal.
Auto: Selects the color system of the input signal automatically
from among NTSC
3.58
PAL-N, or PAL60.
"NTSC3.58"–"PAL-N": Allows you to set the color system to the
selected system manually.
Note
Normally, set this to "Auto." If the picture is distorted or colorless,
select the color system appropriate for the input signal.
When replacing the lamps, set the desired lamp setting.
(1 page 67)
, PAL, SECAM, NTSC
4.43
, PAL-M,
51
Werbung
Inhaltsverzeichnis
