Connecting The Ac Power Cord; Selecting The Menu Language - Sony VPL-FHZ75 Kurzreferenz

Connecting the AC Power
Cord
1
Plug the AC power cord into the AC
IN socket, then attach the plug holder
to the AC power cord.
Plug holder (supplied)
2
Slide the plug holder over the AC
power cord to fix to the unit.
20
GB
AC IN socket
AC power cord
(supplied)

Selecting the Menu Language

The factory setting for the language for
displaying menus, messages, etc. is English.
To change the on-screen language, proceed
as follows:
1
Plug the AC power cord into a wall
outlet.
2
Turn on the projector.
Press the ? / 1 key on the main unit or the
? key on the Remote Commander.
3
Press the MENU key to display the
menu.
If the display cannot be properly seen,
adjust the focus, size, and position of the
projected image (page 24).
4
Select the menu language.
Press the V or v key to select the
1
Operation (
the ENTER key.
Press the V or v key to select
2
"Language (
ENTER key.
Press the V/v/B/b key to select a
3
language, then press the ENTER
key.
5
Press the MENU key to turn off the
menu screen.
) menu then press
)" then press the