Inhaltsverzeichnis
Werbung
Cinema Black Pro
Contrast
Brightness
Color
Hue
44
Advanced Iris
Switches the iris function during projection.
Auto 1: Automatically switches to an optimum iris according to a
projected scene. The contrast of the scene is emphasized most.
Auto 2: An optimum iris becomes smaller than when set to "Auto 1".
The contrast of the scene becomes reduced.
Sensitivity: If "Auto 1" or "Auto 2" is selected, either "Recommend",
"Fast", or "Slow" can be selected according to the desired response
speed with Sensitivity Mode.
Manual: Manually (fixed) adjusts the Iris.
Off: Disables the iris (aperture) function.
Lamp Control
Switches the lamp wattage during projection.
High: Increases the lamp brightness, and projects brighter images.
Low: Decreases the lamp brightness, and enhances blacks by
minimizing brightness.
Tip
When you switch from "Low" to "High", the number of turns of the fan
increases, and the fan noise becomes slightly louder. When you switch to
"Low", energy consumption is reduced, thereby increasing the lamp life.
Adjusts the contrast.
Higher values increase the sharpness in images, while lower values
decrease the sharpness.
You can make adjustments by pressing CONTRAST+/– on the remote
control.
Adjusts the brightness of the picture.
The higher the setting, the brighter the picture. The lower the setting, the
darker the picture.
You can make adjustments by pressing BRIGHTNESS+/– on the remote
control.
Adjusts the color density.
The higher the setting, the greater the intensity. The lower the setting, the
lower the intensity.
Adjusts the color tone.
The higher the setting, the more greenish the picture becomes. The lower
the setting, the more reddish the picture becomes.
Werbung
Inhaltsverzeichnis
