Auping Dublin Maximus Gebrauchsanweisung Seite 14

3858 BW:BW 29-10-2008 12:25 Pagina GB12
4. Attach the lifting arms on both sides of the
foot end (see fig. 5).
GB12
5. Attach the back motor (151747) to the
underside of the base frame using the
screws and locking pin as shown in the
illustrations (see fig. 6).
(foot)
6. Attach the upper leg motor (151748) to
the underside of the base frame using the
screws and locking pin as shown in the
illustrations (see fig. 6).
7. Insert the plug of the back motor into con-
nection point 1 on the control box.
8. Insert the plug of the remote control into
the control box at connection point 2.
9. Insert the plug of the upper leg motor into
connection point 3 on the control box.
10. Secure the cables by fastening the cable
clamp on the control box. (see fig. 7).
fig. 5
fig. 6
fig. 7