Maintenance - Ugolini DELICE Gebrauchsanweisung

clean surface.
5 - Use non-abrasive cloths to dry the external
parts.
5. 3. 4 ASSEMBLY
1 - Put the drip-tray and grill in place
2 - Lubricate the faucet piston (in the area A
shown in fig. 2) using only the grease
supplied by the manufacturer or other oil
used for food.
figure 2
3 - Reassemble the faucet assembly on the
container in the opposite way to which it
was dismantled (see fig. 1).
4 - Install the container putting the central
shaft in place.
5 - Insert the mixer in the central shaft
6 - Position the cover on the container.

6 MAINTENANCE

1 - Daily: check the dispenser for any loss of
product from the gaskets. If there is, first
check the dispenser is assembled correctly
making sure that the gaskets need no
lubricating and they are not faulty or worn.
In this case they must be replaced with
original parts.
2 - To avoid damage to the dispenser the
plastic parts must be lubricated only with
the grease supplied by the manufacturer or
o t h e r g r e a s e
polycarbonate.
Ugolini S.p.A.
c o m p a t i b l e w i t h
DELICE
11