GGP ITALY 102 Gebrauchsanweisung Seite 109

PROBLEM
10. Unusual vibrations while working
11. Uncertain or ineffective braking
12. Erratic forward movement, poor drive when
going uphill or if the machine has
a tendency to rear up
13. With the engine running, the machine does
not move when the drive pedal is pressed
(for hydrostatic drive models)
If problems continue after having carried out these operations, contact your dealer.
WARNING!
Do not take on complicated repair work if you don't have the necessary equipment or the technical
knowledge. The warranty is automatically voided and the manufacturer is not held responsible if repairs are done badly.
EN 34
LIKELY CAUSE
– forward speed too high compared to the
height of the grass
– collector channel is blocked
– cutting deck is full of grass
– blades are unbalanced or loose
– bolts and screws are loose
– the brake is not adjusted correctly
– problems with the belt or the engagement
device
– move the disengagement lever to position
«B»
SOLUTION
– wait for the grass to dry
– remove the grass-catcher and empty the col-
lector channel ( 5.4.7)
– clean the cutting deck ( 5.4.10)
– contact Your Dealer
– check and tighten all the engine and frame
bolts
– contact Your Dealer
– contact Your Dealer
– move it to position «A» ( 4.33)