Cleaning With The Brush - Panasonic ES-LV6Q Handbuch

3
Remove the outer foil section
and clean with running water�
• See page 17 for attaching and
removing the outer foil section.
• Splashing is reduced by rinsing the
shaver in sonic vibration cleaning mode.
• After rinsing with water, shake the shaver up and down
for a few times to remove excess moisture and then wipe
off any drops of water with a dry cloth.
4
Dry the outer foil section, the
shaver, and the trimmer
[A<] completely.
• Allow the shaver to dry in the
shade, avoid direct sunlight.
5
Lubricate the shaver�
It will keep the movement of the
blade smooth and maintain a
comfort shave.
1. Apply one drop of oil to each of
the system outer foils.
2. Raise the trimmer and apply a drop of oil.
3. Switch the shaver on, and run it for approximately fi ve
seconds.
4. Switch off the shaver, and wipe off any excess oil from
the system outer foil with a soft cloth.
Notes
• Be careful not to hit the main body on the sink or any other object
while draining the water. Failure to do so may cause malfunction.
• Do not wipe with thinners, benzine, alcohol etc.
Doing so may cause malfunction, or cracking or discoloration
of the parts.
Wipe with diluted soapy water.
16
ES-LV6Q_EU.indb 16
• Do not use any kitchen or bathroom detergents other than
hand soap.
Doing so may cause malfunction.

Cleaning with the brush

Remove the outer foil section and the inner blades.
(See page 17.)
►Cleaning with the long brush
Clean the outer foil section
[A9], system outer foil [A2],
the shaver body [A] and the
trimmer [A<] using the long
brush.
►Cleaning with the short brush
• Clean the inner blades [A;] using
the short brush by moving it in
direction as illustrated.
• Do not move the short brush
perpendicularly against the blades
as it will damage the inner blades
and affect their sharpness.
2017/12/22 10:34:35