JAC UNIC C2 Bersetzung Der Originalbetriebsanleitung Seite 6

This machine is intended for professional bakers ;
-
- It may only be used by one person at a time. (unless otherwise stated) ;
- Don't allow children or unauthorised persons to use or manipulate the machine ;
- It has to be kept and used inside in a location, away from humidity and heat ;
- The machine has to be adequately lit for carrying out the work satisfactorily ;
- This machine has a noise level below 70 dB(A) as per standard EN ISO 3744.
- Before connecting your machine to the electricity network, check that the machine oper-
ation voltage (see rating plate on the machine) and voltage of the electricity network
are appropriate ;
- Connection of the machine has to be made using an earthed plug ;
- Your electrical installation supplying the machine has to be protected as below :
- North America : Main protection 15A ;
- Rest of the world : Main protection 16 A.
Note : All other problems resulting from another type of connection will not be taken into
account.
Make sure that there are no foreign objects on the moving parts of the machine before
-
you start it up ;
- Check the tension of the belts (casing).
- Check that the phase connection is correct. To that effect, press the green button brief-
ly and check that the motor is running. If the motor does not start, unplug the machine
from the mains and invert 2 phases;
- Make the machine run empty, dust the belts and cylinders with flour.
- In case of danger, press the red STOP button to power the machine off.
- Remove the electric plug before every maintenance and service operation ;
- All maintenance or part changing operations are to be carried out by a qualified person.
CAUTION
CONNECTION
START-UP
DANGER
6