Gaspardo ALIANTE 300 Gebrauch Und Wartung Seite 61

4) Extract the shaft of the spring elements from its housing (Fig.
52).
5) Use the supplied multi-purpose wrench and an Allen wrench
(no. 3) to loosen the fastening screws of the spring elements
as shown in Figure 53.
6) Replace the spring element using genuine spare parts. Then,
assemble the unit back repeating the procedure above in a
reversed sequence.
cod. 19502240
USE AND MAINTENANCE
fig. 52
g
ENGLISH
fig. 53
fig. 54
61