Handicare Coral Bedienungsanleitung Seite 8

English
7
7. Mount the safety key (2x) between the
clickers at the back of the chair. Push down-
wards until it snaps in place.
10
10. Place the backrest cover over
the frame of the backrest and pull it
firmly into place.
8
8
8. Slide the tube into the rear leg (4x).
Adjust to the correct height and click the
E-clip through the chair leg and tube.
Make sure the legs are mounted at the
same height.
11
11. Tighten the straps of the cover around the
frame onto the Velcro. To obtain the desired
tension, adjust the straps.
9
9. Turn the chair upright.
Make sure that all parts are
in place and secured.
12
12. Finally, check the whole
chair once again to make
sure that all parts are in
place and secured.
M A N U A L