Muting Microphone; End Calls; Redialling; Calling Via Voice Dialling - Silvercrest IAN 311608 Bedienungsanleitung Und Sicherheitshinweise

SilverCrest SFA 4.1 E1

9.7 Muting microphone

You can use the mute button (3) to temporarily switch off the microphone (6) during a call so that the other person can
no longer hear you. In this case, press the mute button (3) for about three seconds until a confirmation tone sounds
and the mute button (3) flashes orange once. The microphone is now muted. When muted, 2 beeps sound at regular
intervals to remind you of the muting. If you want to end the muting, press the mute button (3) again for about three
seconds. The mute button (3) flashes orange once and a beep sounds. You are now back in normal talk mode in
which the other person can hear you.

9.8 End calls

To end a call, briefly press the phone button (2) once.

9.9 Redialling

You can redial the last number that was called via the hands-free kit. In this case, press the mute button (3) twice in
rapid succession in standby mode.

9.10 Calling via voice dialling

The hands-free kit allows you to make calls via voice dialling if your mobile phone supports this function and it is
enabled. To establish a connection via voice dialling, briefly press the standby button (8) of the hands-free kit once in
standby mode and then clearly say the name of the desired contact. For more detailed information on the voice
dialling function of your mobile phone, please refer to the instructions for your mobile phone.
English - 43