Volume Setting; Muting Microphone; End Calls; Redialling - Silvercrest SFA 4.1 D1 Bedienungsanleitung Und Sicherheitshinweise

SilverCrest SFA 4.1 D1

9.6 Volume setting

You can increase the volume as needed during a call using the + button (1). A beep sounds if the maximum volume is
reached. You can also reduce the volume using the - button (7). A beep sounds if the maximum volume is reached.

9.7 Muting microphone

You can use the mute button (2) to temporarily switch off the microphone (6) during a call so that the other person can
no longer hear you. In this case, press the mute button (2) for approx. 3 seconds until a confirmation tone sounds and
the mute button (2) flashes orange once. The microphone is now muted. When muted, 2 beeps sound at regular
intervals to remind you of the muting. If you want to end the muting, press the mute button (2) again for approx. 3
seconds. The mute button (2) flashes orange once and a beep sounds. You are now back in normal talk mode in
which the other person can hear you.

9.8 End calls

To end a call, press the phone button (4) once.

9.9 Redialling

You can redial the last number that was called via the hands-free kit. In this case, press the mute button (2) twice in
rapid succession in standby mode.
English - 43